Ruifiber Glassfiber self-adhesive tape is mainly used to repair dryboard walls, gypsum board joints, wall cracks and other wall damage and fractures.
It has excellent alkali resistance and a shelf life of 20 years. It has high tensile strength and strong deformation resistance, and is anti- Cracks, anti-fracture and collapse caused by earthquakes, no deterioration, no foaming, good self-adhesiveness, no need for pre-priming, quick to use, simple construction, saving manpower. The common specifications of Ruifiber glassfiber self-adhesive tape are 8×8.9×9 mesh/inch: 55-85 g/m2.
Width: 25-1000 mm: Length not limited to meters.
Color: Usually white, but also available in other colors.
Construction method: 1. Keep walls clean and dry. 2. Apply tape to the cracks and press firmly. 3． Make sure the gap is covered with tape, then use a knife to cut off the excess tape, and finally apply mortar. 4． Let it dry naturally, then sand lightly. 5. Fill in enough paint to make the surface smooth. 6. Cut off any leaking tape. Then, note that all cracks have been properly repaired, and use a fine composite material to modify the surrounding areas to make them smooth and new.
Post time: Oct-16-2023