What should we pay attention to when installing Ruifiber corner protectors/tape/bead?
1. Prepare the wall in advance. Mark the wall as needed, use 2mm thick double-sided tape to stick on both ends of the back of the corner protector/bead, align the marks and press firmly on the wall, so that the double-sided tape fully contacts the wall, and then you can let go. But don’t touch it. Wait for the glass glue to solidify before you can use it with confidence. There should be no self-adhesive substances such as transparent tape or masking paper stuck to the surface of the corner protectors. They will react adversely with the paint on the surface and cause the paint to lose its luster or peel off.
2. Pay attention to the control and processing of lines. Corner protection construction can not only ensure that the lines of the wall corners are straight and beautiful, and increase the construction speed, but also very effectively enhance the firmness of the wall corners and play a role in preventing collisions. It is better to wipe out a surface than to find a line. This is a very vivid expression by construction workers of the difficulty of corner construction. The use of auxiliary construction of decoration corner guards can completely change this situation. Corner construction no longer requires the use of ruler boards. The traditional and cumbersome construction process has become very simple and easy to operate. It can be mastered by ordinary small workers and can be done in the same way. Create a perfect corner straight line.
3. Fixed corner protector. Place the corner guard strip tightly against the corner of the wall, find it horizontal or vertical, and then scrape off the overflowing cement slurry. After drying and fixing, rely on the positioning edge on the top of the corner guard, and then scrape a layer of putty to level it. For indoor and outdoor decoration, in addition to the indoor yin and yang angles that have been commonly used, there are also crack tapes used to prevent cracking and repair cracks.
How to install corner guards?
1. Where the construction building is less than two meters above the ground, a level ruler can be used to operate the construction. If it is more than two meters above the ground, a hanging wire is required. Construction is prohibited on rainy days.
2. After powdering 4-6MM cement mortar on the completed wall, press the hanging wire from top to bottom to fix the corner strips on the wall. It is required to compact the wall to make the cement slurry pass through the mesh. gushed out.
3. The next process must be carried out after less than 12 hours to prevent collision, displacement or deformation caused by unsolidified mortar.
4. When pasting the corner protection strips, special personnel are required. The installation mode of the corner protection strips is required to be vertical, filled with mortar, and the vertical error is controlled within 2MM. The operation must be done carefully to meet the requirements. The length can be cut at will.
5. The installation of corner protection strips can be carried out in sections, and the mortar should be applied uniformly. The construction should be carried out from top to bottom.
Corner protectors/beads are not only cheap, but also have many advantages and are widely used in installation and construction. For related questions and consultations, please call Shanghai Ruifiber Industrial Co., Ltd.: 0086-21-5697 6143/0086-21-5697 5453.
Post time: Nov-10-2023