Manufacturing Companies for Joint Tape Gypsum - 60g/m2 fiberglass mesh reinforces self-adhesive tape for building construction joint tape – Ruifiber
Manufacturing Companies for Joint Tape Gypsum - 60g/m2 fiberglass mesh reinforces self-adhesive tape for building construction joint tape – Ruifiber Detail:
Self-adhesive fiberglass mesh drywall tape, with lots of advantages such as great alkali resistance and high tensile strength, is an excellent solution for plaster board joining, drywall finishing, and crack repair. In addition to that, Self-adhesive fiberglass mesh is also very easy to use.
Product Name: Fiberglass self -adhesive mesh tape
Material&Process: Woven Fiberglass alkali-resistant fabric coated with adhesive acrylic compound,cut fabric into tapes and pack
Application:Widely used for repairing cracks and joints of drywall ,plaster board and other wall surface
The construction of the ideal material
Self-adhesive fiberglass tape Wide:50mm-1240mm Weight:60g/-110g/
8X8 /inch,9X9/inch 12X12/inch,20X10/inch
Characteristics Of Fiberglass Self Adhesive Tape
◈ Heat resistant performance, the highest temperature for use is 600 °C;
◈ Light, heat resistance, heat capacity of small, low thermal conductivity. Soft, good stays;
◈ Glass fiber with no water, no corrosion, not mildew to change, not bug eat by moth, not easily, a certain degree of scattered tensile strength;
◈ Excellent resistance to aging performance;
◈ Good sound-absorbing, higher than the average NRC requirements;
◈ Use requirements can be tailored, sewing, easy construction;
◈ Glass fiber has good electrical insulation performance;
◈ Glass fiber for inorganic fibers, never burning;
◈ Glass fiber with high strength and length of stability.
Evenly and straightly distributed yarn
Good shrink sealing
Flat roll and face
Beautiful appearance
Specification Of Paper Joint Tape
| Item No. | Density Count/25mm | Finished Weight(g/m2) | Tensile Strength *20cm (N/20cm) | Woven Structure | Content of Resin % (>) | ||
| warp | weft | warp | weft | ||||
| B8*8-50 | 8 | 8 | 50 | 550 | 450 | Leno | 28 |
| B8*8-60 | 8 | 8 | 60 | 550 | 500 | Leno | 28 |
| B8*8-65 | 9 | 9 | 65 | 550 | 550 | Leno | 28 |
| B8*8-70 | 9 | 9 | 70 | 550 | 600 | Leno | 28 |
| B8*8-75 | 9 | 9 | 75 | 700 | 700 | Leno | 28 |
| B8*8-110 | 9 | 9 | 110 | 800 | 800 | Leno | 30 |
Packing and Delivery
Each Fiberglass self-adhesive tape is wrapped up in shrink film and then packed in a cardboard box, The carton are stacked horizontally or vertically onto pallets ,All pallets are stretch wrapped and strapped to maintain stability during transport.
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for Manufacturing Companies for Joint Tape Gypsum - 60g/m2 fiberglass mesh reinforces self-adhesive tape for building construction joint tape – Ruifiber, The product will supply to all over the world, such as: Namibia, Montreal, Detroit, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.
By Vanessa from Sudan - 2016.01.28 19:59
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Mario from Honduras - 2016.02.28 14:19
