Manufacturer for Flexible Metal Corner Tape - Flexible Metal Corner Tape for Inside and Outside Corner – Ruifiber
Manufacturer for Flexible Metal Corner Tape - Flexible Metal Corner Tape for Inside and Outside Corner – Ruifiber Detail:
Details Of Drywall Corner Tape
Flexible Metal Corner Tape is a combination of Joint Tape and metal strips laminated to form an external or internal corner. It is particularly recommended for inside corners on cathedral ceilings, kneewalls, stairways, or any outside or inside corner less or more than 90 degree. It is applied with the metal side to the face of the corner and is embedded into the joint compound.
It comes in roll size varying in size from 50mm x 30m, 52mm x 30m, 50mm x 30.5m etc. Other length also available according customers’ requirements.
Introduction Of Drywall Corner Tape
◆ Cutting it with scissors according to corner lenght the actual length of each side
◆ Apply the joint putty on both sides of the corner, fold it according to the center line, paste the metal strip surface into the joint putty (one side of the metal steel strip should be pasted inside), squeeze out the
excess putty, and clean the surface with a plastering knife. During construction, the metal corner tape at the corner shall not overlap, otherwise the flatness will be affected.
◆ After drying, apply a layer of joint putty on the surface. If necessary, use fine sandpaper to gently polish.
Advantages
◆ Fast and easy application
◆ Coveniet for stock, transportation in rolls
◆ Applied for inside and outside corners
◆ Apply by embedding tape into joint compound
◆ Not only for drawall corner but also for cathedral ceilings, stairways etc
Specification Of Drywall Corner Tape
Packing and Delivery
Each metal corner tape is wrapped up in inner paper box and then packed in a cardboardbox. The carton are stacked horizontally onto pallets,All pallets are stretch wrapped and strapped to maintain stability during transport.
Product detail pictures:



Related Product Guide:
We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for Manufacturer for Flexible Metal Corner Tape - Flexible Metal Corner Tape for Inside and Outside Corner – Ruifiber, The product will supply to all over the world, such as: Gambia, Cannes, Uruguay, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.

The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
