Fiberglass grinding wheel mesh-make your discs stronger

Short Description:

Send email to us

Product Detail

Product Tags

Fiberglass Grinding Wheel Brief Introduction

● High Strength, Low Extensibility

● Coating with Resin Easily, Flat Surface

● High Temperature Resistant

Improving of Weaving Technique

Weaving from yarns without twist: Reduce the damage on yarns during textile process so that to achieve better reinforcement for glass fiber discs; Theoretically speaking, yarns without twist will be thinner coalition yarns, could reduce the thickness of glass fiber discs(under data analysis), beneficial to thin or ultrathin grinding wheels.

New weaving technique: reduce the damage on wrap yarns during coalition process, uniform the tensile strength from wrap and fill direction, make better reinforcement for glass fiber discs. Also the new weaving technique can help reduce the thickness of products.

Fiberglass Grinding Wheel Mesh Data Sheet

ITEM	WEIGHT(g/m2)	DENSITY COUNT(25mm)		TENSILE STRENGTH(N/50mm)		WOVEN STRUCTURE
ITEM	WEIGHT(g/m2)	WARP	WEFT	WARP	WEFT	WOVEN STRUCTURE
DL5X5-190	190±5%	5	5	≥1500	≥1500	leno
DL5X5-240	240±5%	5	5	≥1700	≥1800	leno
DL5X5-260	260±5%	5	5	≥2200	≥2200	leno
DL5X5-320	320±5%	5	5	≥2600	≥2600	leno
DL6X6-100	100±5%	6	6	≥800	≥800	leno
DL6X6-190	190±5%	6	6	≥1550	≥1550	leno
DL8X8-125	125±5%	8	8	≥1000	≥1000	leno
DL8X8-170	170±5%	8	8	≥1350	≥1350	leno
DL8X8-260	260±5%	8	8	≥2050	≥2050	leno
DL8X8-320	320±5%	8	8	≥2550	≥2550	leno
DL10X10-100	100±5%	10	10	≥800	≥800	leno

The regular supply of fiberglass grinding wheel mesh is as below showing:

Fiberglass Woven Fabrics-Leno DL5x5-190-113 5x5/inch,190g/m2,113cm

Fiberglass Woven Fabrics-Leno DL5x5-190-116 5x5/inch,190g/m2,116cm

Fiberglass Woven Fabrics-Leno DL5x5-240-100 5x5/inch,240g/m2,100cm

Fiberglass Woven Fabrics-Leno DL5x5-260-107 5x5/inch,260g/m2,107cm

Fiberglass Woven Fabrics-Leno DL5x5-320-107 5x5/inch,320g/m2，107cm

Fiberglass Woven Fabrics-Leno DL6x6-190-100 6x6/inch,190g/m2,100cm

Fiberglass Woven Fabrics-Leno DL6x6-190-107 6x6/inch,190g/m2,107cm

Fiberglass Woven Fabrics-Leno DL6x6-190-113 6x6/inch,190g/m2,113cm

Fiberglass Woven Fabrics-Leno DL10x10-90-100 10x10/inch,90g/m2,100cm

Fiberglass Woven Fabrics-Leno DL10x10-90-115 10x10/inch,90g/m2，115cm

With high strength and Low Extensibility, it can be used for cutting grinding wheel discs.

Comparison between C-glass & E-glass

E-glass has higher volume density, around 3% volume smaller in the same weight, increase the abrasive dosage and improve the grinding efficiency & result of grinding wheels.

E-glass has better properties on humidity resistance, water resistance & aging resistance, strength the weather ability of fiberglass discs & extend the guarantee period of the grinding wheel.

Reinforcement for Fiberglass Grinding Wheel Mesh

Fiberglass grinding wheel mesh is usually used as a reinforcing material in composite materials, electrical insulation materials and thermal insulation materials, circuit boards and other fields of the national economy.

It is widely used in wall reinforcement, exterior wall insulation, roof waterproofing, etc., and can also be used to enhance wall materials such as cement, plastic, asphalt, marble, mosaic, etc. It is an ideal engineering material for the construction industry.

With features of high tensile strength and deflection resistance, good combination with abrasives, excellent heat resistance when cutting, it is the best base material for making different retinoid grinding wheels.